Airsoft Sniper Forum banner
1 - 18 of 18 Posts

· Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Ok being a bit of a tech nerd I came up with a project for the larger airsoft games, such as Berget and Border Wars.

A remote controlled video surveillance camera, that has enough battery power to last up to approx 3 days that can be accessed from any IP/web enabled device on the battlefield.

The concept would be that a sniper/someone who can stalk would sneak up to a key intel point such as the enemy base or a target that is going to be assaulted, the camera would be placed in a good overwatch position and then anyone can view the feed from a laptop back in base or an iPhone/Android Phone while in the field.

Basically from you guys, I want some feedback, good idea bad idea? Ideas? Things that would be useful to have integrated, things I may be missing. Just general info before I set off building this.
 

· Registered
Joined
·
19 Posts
Discussion Starter · #3 ·
Current plan is:

Pelican 1450 Case
Containing:

2x18000MAh 12v Li-On Battery
5v down step for POE to camera
Low Power routerboard with 11dbi antennas
Neutrik Ethercon for IP67 rated POE cabling to

A choice of either a IR Illuminated Bullet cam for more night orientated work

or

A Pan/Tilt/Zoom dome camera for daylight operations.

Both the case and the camera will be painted. The bullet camera will have a rifle style ghillie cover and the case will have elastic for attaching to vegetation, or due to its everything proof nature for very long missions it could be partially buried without being worried about moisture or anything getting in.

The camera can be located up to 30m from the transmission case in order to be able to have the camera near a roadside and the case further back in denser brush due to its size.
 

· Registered
Joined
·
19 Posts
Discussion Starter · #6 ·
That's an awesome idea and I'd love to see it but... Only 30m away?! Can you increase that 100-150m?

Wolf
No no 30m from the camera to transmission box, and then anywhere from 300-3000m from transmission box to viewing client (Phone/Laptop/Computer) The viewing range would vary depending on terrain, less in dense woodland and greater in open areas.

The reason for keeping the camera and the transmission equipment separate is generally you would want to keep the camera on its own and concealed as its relatively small(Size of a large soda can), where the transmission equipment is larger and more likely to be seen(Size of a small suitcase), being able to have the transmission box further away from the camera allows it to be concealed easier.
 

· Registered
Joined
·
261 Posts
Well I wanted to build something like this too but advanced -> P90 AEG mounted on a Speedome with autotracking but stailed the project. I have worked in the CCTV branch for many years ago (manufacture)

You have to consider that the IR-LEDs from the cameras are visible with bare eyes. If a enemy have a nightvision he would see the camera from miles away. Also consider to buy a camera which have a feature called antivandal other else your camera will get damaged if someone shoot it with high fps.
I won`t recommend you to buy a speeddome (pan-tilt) cause you will need a huge power source for 3 days of operation. If you stll want to buy then buy with SONY FCB modules.
Also search for a camera with motion detection feature -> if motion is detected he will take several action -> trigger the Alarm I/O or ftp/email notification.

If you have any other question feel free to ask

BTw: Where you PAZ or TaskForce?
 

· Registered
Joined
·
2,893 Posts
Guys, check the dates. (I'd just like to point out that if you go to 940nm IR (think it was 940 anyway) the human eye can no longer See it. It's only at 850nm that you can see a red glow)
 

· Registered
Joined
·
19 Posts
Discussion Starter · #14 ·
Necroing my own thread, I am still working on this, just work got in the way for a while, I have a lot of the components purchased, just need some final bits from China and then I can begin range testing,
 

· Registered
Joined
·
7 Posts
I honestly wouldnt have the time but I'll be putting up all the components needed and instructions for making one so that you can do your own.
Hope you post the parts, I was planning on doing something like this bt I don't know how to increased the distance to 3,000m. I was just using a back up camera from a car with wireless transmitters. Can u please tell me what parts are u using.
 
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top