[nrlegg]

it is actually indeed an incompatibility issue in regards to the selector plate and how it interacts with the micro switch. Its not putting enough pressure on the micro switch and thus your long burst of shots.

As a test, take off the plate and press down on the micro switch and pull the trigger. The gun should fire correctly. It happened to me with Lonex GB and the Lonex Selector Plate. I used a KWA plate and that fixed the issue but I imagine its a case to case issue depending on the Gearbox.

Best of luck to you

 

[nrlegg]

But did you do the test I offered?

Yes it was pushing down the switch on mine too, but it wasnt enough.