Airsoft Sniper Forum banner

S&T DSR-1 help!!!

2599 Views 2 Replies 2 Participants Last post by  vlad
So I bought a DSR-1 from Evike for 369 dollars plus tax.
This is my favorite gun from video games, no matter what game i always pick this one.
So i spent about a month of looking around and researching.
I knew i had to tweak the gun.
so i went out to a field to know how much i had to tweak it.
I went to Hill 559 to do a few test games to see personally what to do.
I noticed that the pellets dropped severely like after about ~100-200 ft, it was cronoed at 395 FPS.
I went to adjust the hop up and the manual says to use an allen key to do it so i tried and tried and tried and to no avail the pellets still divebombed.
I used different sizes, I pressed it in and turned, both didn't work.
However where the hopup is supposed to be there is threading like a screw is supposed to be, it might be how I adjust the hopup, if that's the case.
After that, at my place, i live in a culdesac, and my brother made range markers for his sniper rifle and i used them as well.
It turns out that the pellets start to drop severely at around 150 feet.
I want to adjust the hop-up without having to take it apart but if i have to that's ok. I want to keep the gun and use it extensively, i don't mind taking it apart
Please help
1 - 2 of 3 Posts
I just realized this is the HPA tab my bad
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top