Airsoft Sniper Forum banner

761 - 780 of 811 Posts

·
Registered
Joined
·
11 Posts
My BAR 10

Rifle: JG Bar10 Pro
Hopup Chamber: Action Army
Hopup Bucking: Maple leaf autobot 60 degree
Hopup tensioner/Spacer: custom homemade
Barrel: Action army 6.03 430
Barrel Spacers: Electrical Tape
Piston: Action Army
Piston Weight: 65 grams
Spring guide: Action Army
Spring: Laylax sp170
Cylinder: Stock JG
Trigger: ASG 90 degree trigger.
BB Weight: ElderBB .43
Approximate FPS with 0.2 490
Approximate FPS with 0.4 400
Max effective range: 280-300ft
Noise level: What noise?
Scope: Leupold Veri-X III 3.5-10-x40 tactical

Now here is the mod list
Modded heavy piston.
Inner diameter of piston has been shimmed for best fit of the spring.
Cushioning on both ends of the spring to dampen sound.
Foamed stock to reduce noise from vibration.
There are a few other mods not listed as I can't remember them all.
 

Attachments

·
Registered
Joined
·
22 Posts
VFC HK417


TM L96 AWS


Also have
2 WELL M1911 (G192)
1 Systema PTW
1 JG G36
1 Cyma MP5SD6
1 CA M4a1
2 S&T M320
1 G&P M203

That abut it xD will show more photos later on.
 

·
Registered
Joined
·
22 Posts
Krytac SPR MKII

Krytac SPR MKII
Prometheus 6.03 TB
G&G green bucking
Stock hopup
Stock internals
M140 spring
Angel Custom Hive 160mm suppressor
REX 1x22x33 red dot
 

Attachments

·
Registered
Joined
·
4 Posts
custom sai build i just finished last week
g&p 8mm gearbox
8mm ball bearings epoxy to shell
Gearbox shell radiused
Polished slide rails
shs 12:1 gearset short stroked 2 teeth
polycarb piston head with metal rack short stroked 2 teeth with 2nd tooth removed and rack epoxy to polycarb body
shs alum piston head
lonex cylinder
lonex double oring cylinder head
60D sorbotbane padding (yes 60)
tappet and AA latch (brand?)
lonex air nozzle
m130 spring
shs ball bearing spring guide
retro arms red trigger
gate titan mosfet
asg cnc 30k 16tpa motor
R-Hop'd 6.02 ZCI barrel
Bore lapped to .25 microns
Flat bucking
Lonex hop chamber with flat nub


Sent from my SAMSUNG-SM-G930A using Tapatalk
 

·
Registered
Joined
·
71 Posts
Ok guys. This one is "Mustang Sally".

She's an old girl, 10 yo CYMA M14. Totally stock at the moment except for a new bucking, 3D printer heat bed MOSFET, and steel bushings in the gearbox.

The idea is to make a DMR look like a P-51 Mustang.

Top is brown, green and silver weathering, and details are printed on vehicle wrap vinyl, contour cut, then applied. Everything has a clearcoat also.

I was told that upgrading the internals is not too advisable, but long term this might get a Wolverine Reaper system and a Wraith / Storm CO2 system.
 

Attachments

·
Administrator
Joined
·
6,145 Posts
Try uploading the photo to a 3rd party photo sharing site.
Like Imgur or imageshack .. then use the link to share the photos here.


Wolf
 

·
Registered
Joined
·
238 Posts
Here is my new baby
EDGI barrel
Shs 16:1 gears
Merf 3.2
M120 spring
Shs torque motor
Shs piston/pistonhead
Shs cylinder head
Custom nozzle (titanium)
Stock cylinder polished to 0.5 micron
Prometheus purple hop rubber with stock hop up chamber (EIR with M-nub)
I'm currently waiting for my Trijicon acog sight and the rail mount!
So far this gun shoots almost up to 100m dead straight if its not windy!

No, this is not an AK!
Ootko Suomalainen?
 

·
Registered
Joined
·
11 Posts
This is my Tokyo Marui L96 with these upgrades:
-Pdi 90° trigger
-Pdi 90° piston
-Pdi Spring Guide
-Pdi spring m150
-Pdi cylinder
-Maple Leaf 70° bucking
-Action Army 200mm inner barrel
-Bullgear loading plate
-Aluminium loading ramp made by me
received_1566668710120117_1531990228859.jpg

Im thinking to do some paintjob, any suggestions?
 

·
Registered
Joined
·
15 Posts
My Sweet Babies (along my Airsoft time)

M4: G&G CM16 Raider L (spring guide with bearing + Prometheus steel inner + DIY mosfet)

AK: G&G TRK blowback + DIY mosfet



Mikaela (yes...cause of Megan Fox) M14 EBR Cyma + Harris bipod, 50x12 optics, piston head with bearings, spring guide with bearings, M130 spring (by now...) + DIY mosfet... 6.8Kg of pure love and glamour.



Secondary: We G17 with some minor details to get more accuracy.

L96 was changed to Megatron (Echo1 PSR, totally standard but sealed in every possible air leak :D)

This is the PSR Megatron, with it's also DIY cheek rest/raiser with pouch :D





Greetings!

KAOS
 
761 - 780 of 811 Posts
Top