Airsoft Sniper Forum banner

sighting in my m14

1440 Views 5 Replies 4 Participants Last post by  the3rdeye88
G&G Veteran M14/Leapers 3-9x50

So I was sighting in my m14 at 100 feet. I have my windage adjusted right, but for my elevation I am still 3 mil dots high. Dots over the cross hairs. Hop up is all the way down and I am using ASGI .30's. I am using 44mm objective weaver rings which make my 50mm objective lens sit right on top of the heat shield.

Anyone have any suggestions as to why its shooting high?
1 - 1 of 6 Posts
Yea, check the bucking. My friend's KWA M4 was shooting high and it turned out to be that the bucking didn't seat itself properly into the hop-up chamber. It folded itself in and was pressing pretty hard onto the BB.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.