Airsoft Sniper Forum banner

sighting in my m14

1443 Views 5 Replies 4 Participants Last post by  the3rdeye88
G&G Veteran M14/Leapers 3-9x50

So I was sighting in my m14 at 100 feet. I have my windage adjusted right, but for my elevation I am still 3 mil dots high. Dots over the cross hairs. Hop up is all the way down and I am using ASGI .30's. I am using 44mm objective weaver rings which make my 50mm objective lens sit right on top of the heat shield.

Anyone have any suggestions as to why its shooting high?
1 - 1 of 6 Posts
First things first, make sure the flight level of your bb is straight before trying to zero. If it is, then possibly what you stated above is a scope problem.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.