Airsoft Sniper Forum banner
1 - 1 of 8 Posts

· Registered
3,788 Posts
"Hey all I am posting to ask about the compatibility between these 2, I have been doing extensive searching and have yet to find anything less than an ambiguous answer. I have already ordered one, as well as a Prometheus barrel for it. I have already upgraded practical everything short of the trigger mech in the m24 (cylinder head, spring guide, piston, piston head) which were all aps2 compatible. So if it isn't I guess ill just have to but an aps2 or clone of it or even just the guts of one as I am building an SV98 stock for these parts to go into anyway. Please let me know if any of you know for certain weather it will or will not fit. Thank you"

There I fixed the main post for you..... that is why we have a Spell Check button at the bottom of the message box ;)

Nelson come one..... be nicer to the op... it isn't that hard to understand what he is trying to say.

As far as I know that most of the parts in these rifles are APS2 compatible. So if the hop chamber was made for the APS2 then you should be good to go. But always know that when a company clones another rifle, they don't always get everything correct.

There is a fairly good chance that you are going to have to do some work to either the outer barrel, or the chamber itself, to get it to not only work, but fit into the rifle.
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.