Airsoft Sniper Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,045 Posts
Discussion Starter · #1 ·
As per the title
And a after a discussion at our club AGM that an Urban Milsim game might be on the cards for this year with a requirement for 328fps max guns
Not having 1 I thought I'd have to come up with a Tactical Urban Carbine type sniper rifle type thing ;). So I rummaged through my spares box and came across the dis-assembled parts of this,



Plus an old M4 barrel and hop, an old silencer experiment that went awry and a bi pod that came with my Warrior 1.
After rebuilding/modding the hop unit and attaching it to the barrel, making the silencer fit the receiver and take the barrel, I assembled it to the lower receiver of my SPR and came up with this



Its still reasonably quiet, even though the barrel runs to the very end of the silencer, due to the mods made for my SPR project. I haven't tested fps yet, as I don't like the look of it outside ;) but due to the drop in barrel length I'm hoping it wont be far off the require 328
 

·
Registered
Joined
·
1,045 Posts
Discussion Starter · #3 ·
It was the foregrip from an old M4 cut down, along with the outer barrel. All glued together with the appropriate amount of Gripfil/Mitrebond and sprayed black, nothing technical, just good old fashioned bodge it stuff ;) The RIS cover on the top is there just to add strength to the joint (it was originaly there to hold the front straight and in place until the glue cured.)
 

·
Registered
Joined
·
1,045 Posts
Discussion Starter · #5 ·
Sadly there is no accounting for taste ;) SPR and the above top reciever have now been sold to raise finances for a new car :'( such is life ;)
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top