Airsoft Sniper Forum banner
1 - 20 of 34 Posts

·
Banned
Joined
·
215 Posts
What's custom?

I don't consider buying parts and fitting them together like legos to be custom. Nice rifles though.
 

·
Registered
Joined
·
445 Posts
http://www.airsoftbuilds.com/weapon.php?id=1199

DMR PEACE WALKER EDITION by MK23CUSTOM MK23 spain
(KWA) FPS: 420 RPS: 25
Internals
Gearbox: stock (9mm Bushings)
Bushing Brand: king arms
Spring: 1 joule systema
Gears: stock
Motor: marui 30000
Cylinder: Custom mk23 high pressure cylinder
Cylinder Head: Mk23 custom cyclinder head
Piston: JBU
Piston Head: stock
Nozzle: Stock
Tappet Plate: Stock
Spring Guide: Stock
ARL: Stock
Mods: Custom high pressure cylinder set prevent air flow through nozzle until the cylinder
pressure is on the maximum level , it provides an air hit contain all cylinder capacity in the critical moment...it rise about 80/100 extra fps. Now we can upgrade any marui or similar aeg to DMR only with this cylinder set and 1 joule spring...420 fps.
Also mk23custom A.C.S (Air Compression system ) you can regulate between 420 to 320 fps by Dial Adjustment located on ejecting window

Barrel & Hopup
Barrel: KM
Length: 509
Diameter: 6.04
Hopup: madbull tracer unit
Bucking: mk23custom hop up bucking
Nub: guarder
Mods: tracer unit with aditional battery
Externals
Micrometric Stock 6 positions all Adjustable parts .

Electrical
Battery: 7.4 V Lipo
Battery Location: Buttstock
Mosfet: A-B mosfet

Notes
www.mk23custom.com
 
1 - 20 of 34 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top