Airsoft Sniper Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter · #1 ·
Just wanted to share my newest project.
I want to say dont use Falcon blue bucking its horrible. As I speak I'm having Falcon making me a kc02 bucking of 75* and 85*. Not sure when I will get I will get it.
here is the ghillie sock I made. Add me on FB, pics there are much better to see.
http://www.facebook.com/?ref=logo#!/kevin.williamson.315
So far as $ wise I got $850 in it. If you want to convert to HPA, PM me and I'll set you up with what needs to be done to make HPA Rig.
Enjoy hope you like it.

Specs:
Ra tech:
6.01 TBB, 510mm
steel bolt
steel charge handle
mag release
hopup bucking

Tactical Specialist Custom:
Renforced steel:
fire pin, disconnector & guide bead
trigger&sear
hammer & hammer strut
Piston

HPA KC02 build
BTW Dont use the Silicon Spray! Use GHK Silicone Drops from Evike, or some Silicone for rc car shocks.

Shooting 300ft
 

·
Registered
Joined
·
536 Posts
Question can I do R-hop on my barrel with the space at the end. I'm afraid the R-hop will slip off.
http://shop.ehobbyasia.com/media/ca...d08d6e5fb8d27136e95/R/A/RAG-KJ-008_1_mark.jpg
First off, the original hop up bucking (on which you need to remove the mould, to turn it into a flat bucking) would keep the r-hop in place when pushing against the barrel from that side..second, you might want to superglue (use a super-tiny amount) the so-called "legs" of the r-hop (the sides that touch against the barrel window) to keep it in place.

May I stress TINY amount :)
 

·
Registered
Joined
·
11 Posts
I may try some different styles of hop, the stock style sucks even with the ratech parts. If I get it tuned I may get a mag of good clean shots then they start going everywhere, if I keep the hopup low it stays consistant. Thats the reason Im using it as a urban sniper, it has the power to go the distance just not the hop ability past 150-200 ft
 

·
Registered
Joined
·
536 Posts
Well you just hit the final point in Airsoft, when talking consistency and accuracy (which can sometimes mean the same thing, in long range shooting): to me the hop up is the part putting more "chaos" and inconsistency of all. Close second is the BB itself and then gas output for gas users like me.

Eliminating the other two can be easy but the hop itself really revolves around the R-Hop being the best available right now. All you need to do to feel the inconsistency is to send 10 rounds at 150ft with your hop off and then 10 others with your hop set normaly.

When you see how accurate the platform is with no hop (provided you have good internals) you will be scared sh*tless :)

There is nothing worse than an Airsoft gun shooting sometimes left sometimes right sometimes straight. It throws the fun of having learnt good fundamentals away since it drops random chaos into your discipline.

Sadly, that all goes down to the scourge of approximation in Airsoft that most people are afraid to talk about...
 

·
Registered
Joined
·
82 Posts
Discussion Starter · #9 ·
I may try some different styles of hop, the stock style sucks even with the ratech parts. If I get it tuned I may get a mag of good clean shots then they start going everywhere, if I keep the hopup low it stays consistant. Thats the reason Im using it as a urban sniper, it has the power to go the distance just not the hop ability past 150-200 ft
Actually RA Tech hop up bucking is a similar H Hop design for the KC02. The Falcon old style for KC02 is Flat hop which really sux 1 out 5 shots, shot straight. But im waiting on Falcon to finish there testing on the new KC02 bucking. I have a pic of the new design. email me @ [email protected] if you want to see it.
 

·
Registered
Joined
·
82 Posts
Discussion Starter · #10 ·
these are all the trigger parts of the trigger you will need.
Note: some shimming had to be done. Where the pin thats goes through hammer. just a couple of washers will work.
http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Other_WA_M4_Parts_TSC_CNC_Steel_Re inforced_Fire_Pin_Disconnector_Guide_Bead_For_KJ_K C02.htm

http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Hammers_and_Triggers_TSC_CNC_Steel _Reinforced_Hammer_Hammer_Strut_For_KJ_KC02.htm

http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Hammers_and_Triggers_TSC_CNC_Steel _Reinforced_Trigger_Sear_For_KJ_KC02.htm

NOTE: the o-ring thats comes with the piston isn't big enough to fit the inside the cylinder. go to grainger tools and buy this o-ring. p/n5JJR4 or 110 Buna O-Ring. its a tight fit at first,but works a whole lot better

http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Pistons_and_Cylinders_TSC_CNC_Stee l_Reinforced_Piston_For_KJ_KC02.htm
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top