Airsoft Sniper Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
69 Posts
Discussion Starter · #1 ·
Heyo again. Long time since I posted here the last time, but anyway, here's my newest art of work.


(Also visible in the pic: my boltie, and the loyal sidearm 'o mine.)

Ahola Industries (My workshop) Sr-16. Shooting 480fps via .2g bbs at the moment, effective range out to 120 meters using madbull .4g washed pellets.

Guarder gearbox
7mm steel bushings
Systema double torgue gearset, all helical
Prometheus ARL
ASCU v2, tweaked.
custom trigger, shortened pull down to 1mm
Azimuth piston
Madbull ball bearing spring guide
M130 spring, irregular pitch
Modify cylinder head
DIY pistonhead, via integrated AOE fix & 12 ventilation holes
Systema cylinder
Custom hop-up. Uses just a nub, no bucking reguired.
Deepfire 6,02 430mm barrel
Rewound G&P Devil Jet

Mods; AOE, Trigger pull reduction, DIY hop, Barrel polishing, shimming, 250c low-res wires with a modified ASCU (faster trigger response and lower battery consumption on firing and idle)

Tell me how you like it!

As a little teaser of upcoming posts...
Last but not the least, Upcoming project in my hands here:

FCC PTW
 

· Registered
Joined
·
69 Posts
Discussion Starter · #5 ·
Inthetallgrass, you're right about the hit confession, I might have lied there earlier. I've had multiple times situations when people don't take the hit even from 40 meters. To be honest, the hop-mod is the only "secret" that gives the range & accuracy to this banger.
 

· Registered
Joined
·
69 Posts
Discussion Starter · #8 ·
There are pics of my boltie in another topic called "My gun (VSR-10)", and I'm planning on making a tutorial for the specific mod. As a teaser, it'll cost you only 2 O-rings, some sealant and a nub.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top