Airsoft Sniper Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hey all,
So I have recently acquired a Noveritsch ssx303.
I love the gun, it is incredibly quiet, and insanely accurate at mid to long range.

I have had a small problem with it though.
Every so often, my mags stop feeding.
The hammer cycles, the gas is ejected, but no bb is fed.
Has anyone else who owns one had this problem/have a fix?
 

·
Registered
Joined
·
29 Posts
MK23 NBB platform suffers from multiple issues; non-feeding is one of them.

Does this happen with all mags, or just one?

Verify bbs are not becoming jammed in mag.

Check mag gasket height; verify feed lips are notched correctly. You may need to modify nozzle assembly as well.

All my MK23 mags, I had to install Hadron Designs Hot Lips and modified nozzle assembly.

And, contact tech support.
 

·
Registered
Joined
·
266 Posts
I had similar issues (along with another one involving the suppressor threading) with my SSX23 for the brief time I owned it back when they first were released. Novritsch customer service quickly helped me out as best they could. I think there are new feed lips available for the mags now, but I don't really keep up with it. Good luck.
 

·
Registered
Joined
·
226 Posts
I would contact Novritsch support.

The SSX303 uses the same magazines as the SSX23, so you don’t have to carry different magazines on the field.

The SSX23 does have issues of not feeding properly, if the bbs aren’t in the mag correctly. Maybe this is the issue? Take a look at this photo:
18563

You also may have a Gen1 magazine, which has feeding issues:

“Gas Magazine for the SSX23. Holds 24 BBs.
Improved Feedlip design for more reliable feeding. Update your Gen1 magazine with this sparepart.”
 

·
Registered
Joined
·
959 Posts
1 - 6 of 6 Posts
Top