Airsoft Sniper Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi All. I am a Tech and recently repaired a cracked stock that I got on a Well VSR-10. The Magazine that came with it was busted so I assume that what busted the stock, did so with the magazine seated in place. Now I have a replacement magazine and it was almost impossible to get out. I had to pry it out with a flat head. So I took a razor blade and cleaned the bottom lip of the magwell where the glue was for the cracked stock. Got that flush and smooth and the mag still stuck. Finally I trimmed the magazine as well to round over the edges some more.
Is that normal of replacement magazines?

Thanks. Unfortunately I don't have any pics right now that I can post to show the mag and mag well.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top