Airsoft Sniper Forum banner

Stupidness with UTG l96 hopup.

4800 Views 33 Replies 6 Participants Last post by  nelsonho396
SO being the stock l96 hopup we all know it is horrendously bad. So I got mine and the arm that touched the bucking was broken of course.So I was being stupid of course and wonder what if I shoved a aeg nub in there so I did I sanded down the arm part flat then put a stock nub in and centered it in the chamber. Do you think it will work? I just got bored so I tried that. Yet to be tested.
1 - 4 of 34 Posts
It depends, some people put aeg nubs to vsr-10 hopup arm, if it isn't much longer/shorter than the original arm, it should work okay, unless you didn't get it totally horizontal, so it would give more hop to left/right.
He didn't talk about the bucking. And it's l96, not vsr. :p
1 - 4 of 34 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.