Airsoft Sniper Forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter · #1 ·
So I was interested in getting a G-spec to beable to strap onto my pack, but was wondering something. If I had a 6.01 inner barrel in the rifle, would having a 6.03 barrel in a removable suppressor increase the accuracy at all, or if it would be useless? I figured it would but only if the barrels were lined up perfectly, but I wanted some insight into this.
 

·
Registered
Joined
·
250 Posts
You mean having a suppressor with an ID of 6.03 and an inner barrel of 6.01? Most suppressors are just hollow cans.

I think there is a definite possibility and end of barrel device will work for sure, what that devise is I am unclear on. I am working on a different set of problems. I will likely work on that next for my gun design, a 2 stage barrel I am calling it.
 

·
Registered
Joined
·
1,033 Posts
Even then, you would be better off just running a TBB through the suppressor, which takes about 30 seconds to drill out. I only use a 303mm IB in case I had to take the suppressor off, I wouldnt have a barrel sticking out of the end of my gun
 

·
Registered
Joined
·
1,033 Posts
quigly said:
The reason I wanted it removable is so, like I said in my first post, have it strapped to the side of my pack and not have it be catching all the trees and such.
then you just better off buying a 303mm 6.03, the normal size for the gun.
 

·
Registered
Joined
·
2,199 Posts
Mgunner said:
inthetallgrass said:
It generally doesn't change the decibel measure but merely changes the sound to a poof.
Pretty much. Its just seems quieter, though i doubt it is.
Unless of course you floow my guide. Hmm I really seem to be whoring out my guide.
 

·
Registered
Joined
·
1,033 Posts
inthetallgrass said:
Mgunner said:
Pretty much. Its just seems quieter, though i doubt it is.
Unless of course you floow my guide. Hmm I really seem to be whoring out my guide.
Its funny because I did read the guide, but i had done almost all of it already. Great minds think alike I guess.


As for the second barrel idea, I know it looks good on paper, but it would be VERY hard to actually do.
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top