Airsoft Sniper Forum banner


5321 Views 21 Replies 10 Participants Last post by  schultz98
So here is my sweetypie:

About the gun: I have added the rails to mount bipods and all kinds of cool stuff to it but right now there's nothing on it, atm Im using my DIY bipods as you can see from the pictures

Internal mods: I have a piston with bearings and double O-rings, a steel piston catch, Element (65) hopup rubber, a madbull black python tbb and I have made it 100% airtight. Right now it has a VSR-10 type of M190 spring witch has been cut down a little to make it fit. I also have put a little screw in to the trigger box so I can adjust the sensitivity of the trigger
In the future I will be modifying the spring guide to a V2 ball bearing spring guide and im going to add long rails on top and bottom of the handguard. And ofcourse there will be an SVDS style foldable stock.
a few more pics

My gun has had pretty much only two kinds of feedback, people think its either really ugly or purely awesome. But I like it :)
See less See more
1 - 1 of 22 Posts
Nelson is right about some scope mounts that can accept either SVD or AK side rails (We're all family here, it's all good). I have one on my SVD-S--right here

--and I don't like it very much. Aside from breaking the traditional POSP/PSO look, it's not very ergo (sharp rails, which is why the rail cover is there), is high, and just looks fugly. Did I mention it looks fugly? :( Well it works for airsoft, and I don't necessarily need a real scope.

OT: The best thing I like about your SVD is the little strip of rail underneath the handguard. If you attached a grip, or replaced the rails with a grip, you could start building an SVU. Of course, bolt pull is gonna be a bitch. But hey, the PAS kit is out there for a reason. If you ever decide to go bullpup, I fully support you.
See less See more
1 - 1 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.