Airsoft Sniper Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
133 Posts
Discussion Starter · #1 ·
Hello,
So i have been trying to solve a firing problem with my aics. Every time i fire the bb goes about 30ft then drops. I chronoed it at 94fps. Any Ideas what could be the issue?
I am almost positive the mag is not the problem as it release gas well.
Could it be related to the hopup?
Thanks!

- Topa
 

·
Registered
Joined
·
133 Posts
Discussion Starter · #3 ·
I am using green gas with .3g bbs at about 50F (although that might be cold it should go well above 100fps). I know the striker spring and pcs valve are fine because it was firing perfectly about a week ago and I hevent touched those parts at all.

- Topa
 

·
Registered
Joined
·
133 Posts
Discussion Starter · #8 ·
Ok thanks Wolf and Cheese!
I will be investigating the mag parts next week as I am away from my gun. Although, I know for sure that the striker plate is fine as it was replaced with the pin and the O-rings are not frozen.

- Topa
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top