Airsoft Sniper Forum banner

Tanaka m700 Long mag not working right

3295 Views 7 Replies 4 Participants Last post by  dirtydan
Yea, my tanaka m700 long magazine isn't working right, and it's brand new. The gas doesn't wana seem to go in where the hole is, and will spray everywhere..i am holding it straight up and down, nd the can of propane as well. Then when shootin, the 1st shot usually wont fire, then next will be weak, and by the 3rd or 4th one, it sounds okay, and sometimes, it just is weak the whole way. Also, I can't really tell when my mag is full, due to problem number one. HELP ME PLEASE!!
1 - 1 of 8 Posts
i just got a long mag for my tanaka and it leaks a little from the valve when you put the gas in but thats kinda normal.
also my screws were prity lose on the top to so make shuer thoes are tight.
otherwise id say take the bottem off and see if everything is tight (lol that sounds dirty)
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.