Airsoft Sniper Forum banner

Tanaka out of action

1425 Views 6 Replies 6 Participants Last post by  mayhem
So today, after spending atleast an hour to align the bucking properly then putting the rifle together, I put the bolt, began to lock it, and found I couldn't close or open the bolt anymore, then the piece on the underside of the bolt (depresses the trigger mech) sheared off, so i'm pretty much done with it.

I don't know if I even want to carry on with this rifle anymore
1 - 7 of 7 Posts
It can be out of spec depending on your rifle.
Post a photo of the broken part...
As for G&G replacement parts as Mroverkill said there are issues with some rifles..
Avoid the G&G Power pack and buy the parts individually, you'll have bigger chances of success this way!!

I've heard of them being out of spec, but I've also heard of people just filing them a little and they worked perfect.
i agree;you could also take photos of the parts so we can have a better understanding of what the problem is

post away ts;we are here to help :)
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.