[toomanybbs]

So my Tanaka is shooting left at 100+ feet, there is so much potential for it to shoot 250+ ft, but it's curving left hard.

I've identified the problem: bucking is missaligned, but no matter how much I fiddle with the bucking, put everything back together, it still sits left. Now, I do add a little teflon tape around the bucking and then electrical tape on the chamber and the big gold nut(?), that keeps things from wobbiling. Could this torque my bucking?

I also electrical tapped the barrel end plug for a tighter fit, causing me to have to twist and push it in place, would this be exerting torque on the bucking?

Anyone have any solutions?

 

[toomanybbs]

Yea, I should probs add some info about my rifle.

Laxlax 555mm inner barrel
Vsr-10 conversion
Nineball bucking
CO2 external rig
G&G contact parts

But the spartan chamber has a notch for the nub on the outside.

 

[toomanybbs]

Try it out without any mods and see what happens.

Wolf

Alright, I took off some of the electrical tape, I believe it to be centered now, but I won't know until I test it again...whenever that is .

Thanks for the help guys, if you have anymore info to share, it's welcome.