Airsoft Sniper Forum banner
1 - 4 of 327 Posts

· Registered
Joined
·
5,711 Posts
There is also this 6.00mm:
Orga Super Power Barrel 6.00mm for VSR (430mm)
I know that most people say to keep away from very tight bore barrels but I have found that I can get more accuracy from a 6.01mm barrel if it is short. This just means that I have to up the spring a little more to get the higher fps. Tighter bore barrels also help with joule creep. I gained an extra hidden 30fps by swapping out a 6.03mm for a 6.01mm. So I wonder what a 6.00mm will do.
 

· Registered
Joined
·
5,711 Posts
Bobcat. With your M700 what did you find better, HPA or CO2?
What was quieter? Advantages and disadvantages?
Also, how many shots do you get from a CO2 canister?
 

· Registered
Joined
·
5,711 Posts
We need a manufacturer to make an HPA M700 that has the gas bottle inbuilt into the hollow stock with the pressure valve inbuilt somewhere so it is visible and the air tubing to be hidden through the stock. Then the mag would not have the big tube sticking out of it and it would mean that you would not have to carry a bottle on your back. You also would not be so tied to the gun.
I know you can put the CO2 gas in the stock but it would be good to have a larger gas capacity so you do not have to change CO2 canisters so often. So a stock size HPA bottle inside.
 

· Registered
Joined
·
5,711 Posts
1 - 4 of 327 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top