Posts by bobcat
61 - 80 of 327 Posts
If you have another magazine by any chance, you should check to see if both mags experience the same issue. If they do, then its a trigger problem, but if not, its a magazine problem. Isolating the issue is very key to solving anything with the M700.
Yeah, thats how most people (or at least I) did it.
I wouldn't recommend putting the whole gun in, all you need is a small bucket.
Hook up the airline to the magazine and throw everything involving the air rig into the bucket.
Your regulator should be water proof because, well, if it wasn't then air would leak.
Air tight also means waterproof.
The PSI you run your system at depends on your velocity needs. Generally speaking, you want to run the lowest PSI that will get you your desired velocity.
I wouldn't recommend putting the whole gun in, all you need is a small bucket.
Hook up the airline to the magazine and throw everything involving the air rig into the bucket.
Your regulator should be water proof because, well, if it wasn't then air would leak.
Air tight also means waterproof.
The PSI you run your system at depends on your velocity needs. Generally speaking, you want to run the lowest PSI that will get you your desired velocity.
I think you should work out the issue with Palmer. Their regulators are great, and are designed for the sport. Since it was their mistake, you should get what you ordered.
I wouldn't recommend LPR either. You can use HPA tanks and LPR tanks with an HPA regulator, but only LPR with LPR regs.
HPA is very common, too.
I strongly urge you to avoid "get-it-here-itis", a common but serious disease that leads victims to make decisions based on a timely delivery.
I wouldn't recommend LPR either. You can use HPA tanks and LPR tanks with an HPA regulator, but only LPR with LPR regs.
HPA is very common, too.
I strongly urge you to avoid "get-it-here-itis", a common but serious disease that leads victims to make decisions based on a timely delivery.
The only way you can use AEG buckings is if you convert to the 3D printed HS5 chamber for R-hop. I tried this route... NOT recommended on any level. It's fragile plastic and is undersized to begin with.
AEG and VSR buckings have different outer diameters so they are not compatible.
You could remove the lip, but this isn't recommended either because that lip is crucial to sealing the chamber from leaks.
The best course of action for the best gun is to return the barrel (or sell) and purchase a different one.
The only barrel you need to look for is a 630mm VSR barrel.
AEG and VSR buckings have different outer diameters so they are not compatible.
You could remove the lip, but this isn't recommended either because that lip is crucial to sealing the chamber from leaks.
The best course of action for the best gun is to return the barrel (or sell) and purchase a different one.
The only barrel you need to look for is a 630mm VSR barrel.
Check out what happened when I did an ER-hop on mine:
http://www.airsoftsniperforum.com/44-others/11511-project-kjw-m700-er-hopped.html
http://www.airsoftsniperforum.com/44-others/11511-project-kjw-m700-er-hopped.html
Hi,
Please read the guide. It has the links to the things you need. It also says what to buy and what not to buy.
The spare bolt is not needed. Neither is the hopup screw, nor the CNC hop up chamber, not the KA aluminum air nozzle.
It also says to not buy Angel Custom. Get a Laylax, PDI, Prometheus, EdGi, etc. barrel.
Please read the guide. It has the links to the things you need. It also says what to buy and what not to buy.
The spare bolt is not needed. Neither is the hopup screw, nor the CNC hop up chamber, not the KA aluminum air nozzle.
It also says to not buy Angel Custom. Get a Laylax, PDI, Prometheus, EdGi, etc. barrel.
If you want to use the 4mm tubing with the 1/8 NPT fittings on the magazine, you need this fitting:
https://www.mcmaster.com/#5225k721/=1bo6b0f
![]()
https://www.mcmaster.com/#5225k721/=1bo6b0f
The M700 has some serious power behind it when HPA'd. This power is a result of a 650mm inner barrel and expanding gases. That's the real benefit of the gun. Range has never been a problem, but accuracy has always been left for desire. The best I could get was from an ER hop, which shot well, but ended up blowing under 100 shots.
If you have access to a 3-axis hand mill, you could make a steel nub like dobey did for his gun. This route would require a special chamber as well, since the original chamber does not allow for a large enough nub.
I ended up reviving my VSR with the Wolverine Bolt and an AA chamber and it's likely I won't go back since my VSR is damn accurate. Additionally, parts for the VSR are widely available from many different retailers.
If you have access to a 3-axis hand mill, you could make a steel nub like dobey did for his gun. This route would require a special chamber as well, since the original chamber does not allow for a large enough nub.
I ended up reviving my VSR with the Wolverine Bolt and an AA chamber and it's likely I won't go back since my VSR is damn accurate. Additionally, parts for the VSR are widely available from many different retailers.
61 - 80 of 327 Posts
