Airsoft Sniper Forum banner

The "ultimate" quide to dampen the minor noises! (pun intended ITTG)

2561 Views 7 Replies 4 Participants Last post by  fdkrew
I had some experiment with my vsr-10 today, I have always been annoyed of the little clicks and clanks when moving the bolt handle up and down.
Firstly, get some semi- thick grease, open the bolt from behind, and put grease in there, there is no limit, so put it in there plenty.
Now we are rid of the "clank", to get rid of the clink, you have to have some shrink tubing, put it on the small rod that goes down when cocking, and up after it, making an annoying click. After you have shrinked it on there, you have to file the hole where it goes through to fit because otherwise the shrink tube will be blocking it, then glue it to place.
I will add pictures soon.
1 - 4 of 8 Posts
Camtheman, this might not work as well on l96, but it does work on vsr-10!
Oh right! I totally forgot about them, I'll get them tomorrow.
The image:

Put a shrink tubing there, then glue it to place, you have to file/sand some of the walls around it to make it fit.
See less See more
1 - 4 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.