Airsoft Sniper Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
241 Posts
Discussion Starter · #1 ·
I currently have the UTG shadow ops L96. I bought it summer of like 10' when I started getting more serious into sniping, and In the last few months I've started upgrading. I was looking at the snipers section of Evike and I stumbled upon the Matrix AW-338. The body is orgasmic, it has the functional mono pod, cheek rest, and folding stock. I would like to know if the parts I have for the PSS96 are compatible with the APS2 system of this Matrix.

http://www.evike.com/product_info.php?cPath=21_48&products_id=37276

I've bought:
-PSS96 Laylax Zero Trigger
-PSS96 Cylinder head
-PDI Hop-Up chamber for type 96
-Prometheus 650mm 6.03 tightbore
-Firefly Bucking (Hard)
-SCS Nub
-PSS96 Silencer adapter

I've looked at topics for this but I'm not entirely sure about about this L96 since it's new. Will my hop up fit in the fluted barrel of the Matrix AW-338, and will the PSS96 silencer adapter fit on the outer barrel? Will the trigger fit? I think the Cylinder head might be compatible, but again I'm not sure. Also will the PSS96 teflon cylinder fit on the Matrix?

Thanks.
 

·
Registered
Joined
·
504 Posts
Never heard of Matrix but people give them bad reviews, i'd buy the well mb-08 instead as its an mb-01 with the .338 stock which is what your after really isn't it?

Zero
 

·
Registered
Joined
·
504 Posts
UTG MK96 and well mb-08 are the same gun. And your parts are compatible with the mb-08 as the mb-08 is exactly the same internally as the mb-01, just with a .338 AW stock which is why you should get the mb-08

Zero
 

·
Registered
Joined
·
189 Posts
To make some brand issues clear (zero made one), Matrix is just the house brand of Evike. If you see Matrix on any of the products on their website, they just re-branded it to give themselves more money. Angel Custom is thought to be another house brand of Evike where (with their sniper parts) they re-brand Laylax parts straight from the factory. UTG and Well sniper internals are the same. I wouldn't buy anything with the "Matrix" brand only because it might not be of the best quality. You get what you pay for.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top