Airsoft Sniper Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter · #1 ·
Hello, I just have a few questions for you guys. First for the G-spec owners would you say that you get as much range and accuracy as the standard 430mm barrel. Know lenght dosen't mke that much a difference just curious. For the Pro model owners, was it easy to remove the sights that come on it. Also 2Echo if you read this what model is your gun cause I like the flashhider.
 

·
Registered
Joined
·
250 Posts
The stock cylinder really only supports about a 425-450 mm barrel in that at about that size there is nothing pushing the BB by the time it exits with a 6.01. Not good not bad, it depends on who you ask.

I got basically the same results with 330m ad I did 500 mm at 75n feet. At longer ranges the longer one may have helped, not sure.

Good luck!
 

·
Registered
Joined
·
283 Posts
I've had both, Range is rather close either way. All comes down to which one you like the looks of better!

Also, If you drill out the end cap of the G-spec, you can run a 430 mm through it.


You'll be happy with either choice.
 

·
Registered
Joined
·
283 Posts
chaoticairsofter said:
I think i'll get the G-spec thanks guys. One last question. do you guys recomend I stay with the 330mm length or should I get a longer one.
G-spec is 303mm, Pro sniper is 430mm.

I don't really notice the difference in terms of performance, but I like being able to take the silencer off and use the G-spec stubby. 303mm for me!
 

·
Registered
Joined
·
1,033 Posts
Ct Man said:
chaoticairsofter said:
I think i'll get the G-spec thanks guys. One last question. do you guys recomend I stay with the 330mm length or should I get a longer one.
G-spec is 303mm, Pro sniper is 430mm.

I don't really notice the difference in terms of performance, but I like being able to take the silencer off and use the G-spec stubby. 303mm for me!
Same here. It just looks... Awesome.


Drilling the end cap takes all of 30 seconds, just make sure the hole is straight.
 

·
Registered
Joined
·
4,148 Posts
Good job necro posting a thread that is almost five years old :shrug:

EDIT: Darn Ghost beat me to it :hehe:

Anyway, you can screw the rear sight off. The front sight can simply be pried off AFAIK. I never installed mine anyway :hehe:
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top