Airsoft Sniper Forum banner
1 - 1 of 14 Posts

· Registered
250 Posts
The stock cylinder really only supports about a 425-450 mm barrel in that at about that size there is nothing pushing the BB by the time it exits with a 6.01. Not good not bad, it depends on who you ask.

I got basically the same results with 330m ad I did 500 mm at 75n feet. At longer ranges the longer one may have helped, not sure.

Good luck!
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.