Airsoft Sniper Forum banner

Tokyo Marui AWS L96 (BB weight)

2801 Views 4 Replies 5 Participants Last post by  CobraRo
Tokyo Marui AWS L96

The part list I bought is: 6.01 Precision Barrel, Cylinder, Cylinder Screw, Cylinder Head, 7mm Spring Guide, 500 FPS Spring, High Pressure Piston, Trigger Sear, Piston Sear, Spring Guide Stopper, and Maple Leaf 60 degree Rubber.

Note: I having my local airsoft store upgrading my gun and sighting/zero-ing it in for me.

Because I have a 500 FPS spring with .20s, what's the recommended bb weight and brand I should use?

I am thinking .32 and haven't shot with those as I only have .25. Although from all the forums I'm seeing, I see .36 being used a lot. Please indicate the pros and cons of using a .32 BB (best brand you can think of when listing pros and cons) and with my gun should I be pushing higher?
1 - 1 of 5 Posts
With a 6.01 barrel you'll need to use the best BBS you can find, and make sure you keep the barrel really clean.
If you're using the stock length barrel you'll be short of cylinder volume to push really heavy BBs, but something like Geoffs 0.36g should give good results. Make sure your ammo is clean as you load it, and keep the mags clean while you're skirmishing.
There's no substitute for trying a few different brands and weights to see what gives the best results.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.