Airsoft Sniper Forum banner

Tokyo Marui AWS L96 (BB weight)

2810 Views 4 Replies 5 Participants Last post by  CobraRo
Tokyo Marui AWS L96

The part list I bought is: 6.01 Precision Barrel, Cylinder, Cylinder Screw, Cylinder Head, 7mm Spring Guide, 500 FPS Spring, High Pressure Piston, Trigger Sear, Piston Sear, Spring Guide Stopper, and Maple Leaf 60 degree Rubber.

Note: I having my local airsoft store upgrading my gun and sighting/zero-ing it in for me.

Because I have a 500 FPS spring with .20s, what's the recommended bb weight and brand I should use?

I am thinking .32 and haven't shot with those as I only have .25. Although from all the forums I'm seeing, I see .36 being used a lot. Please indicate the pros and cons of using a .32 BB (best brand you can think of when listing pros and cons) and with my gun should I be pushing higher?
1 - 1 of 5 Posts
Elite force .32 are pretty good since they are cheap but aren't the absolute best, and I have heard great things about the BLS bbs but they are kinda expensive. but for a 500 fps gun you will definitely want .36-.4g bbs. I believe if you use a .32 you will lose quite a bit of accuracy but the bb will be traveling fast. Hope this helps.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top