Airsoft Sniper Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
309 Posts
The chamber is just like the original TM one besides it's black in color. I think where you're getting confused is the 'Precision' part, I've seen countless threads talk about the TM Precision Chamber when really the only part that's 'Precision' is the barrel.
 

·
Registered
Joined
·
10 Posts
Discussion Starter · #3 ·
The chamber is just like the original TM one besides it's black in color. I think where you're getting confused is the 'Precision' part, I've seen countless threads talk about the TM Precision Chamber when really the only part that's 'Precision' is the barrel.
Yes, thank you.
The reason i'm asking is because i've read that the TM chamber is a lot better than the one in JG's VSR. So i were thinking why not spend a little extra and get better build quality, and a better chamber. So i didn't have to buy the "Precision pack" as well.

Thank you for making it clear to me :tup:
 

·
Registered
Joined
·
309 Posts
I've never compared the chambers but the only thing that I would assume is different is the meshing between the two halves and the amount of wiggle room the arm itself has in the chamber. But that's nothing some DIY can't fix if the JG is a little out of whack.
 

·
Registered
Joined
·
5,597 Posts
I have compared both the JG and TM hopup chambers and they are pretty much the same. I would happily run with either. One advantage that the TM has over the JG is the clicks in-between each adjustment is much clearer on the TM
 

·
Registered
Joined
·
296 Posts
They were different about 5 to 8 years ago. Not sure exactly when it changed. Any newly bought tm will have tje same chamber. I bought the.set as I wanted to try the.longer barrwl and.it seemed to be a good deal. Not sure if I'd say it was better though.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top