Airsoft Sniper Forum banner

Trigger assembly rebuild

3006 Views 16 Replies 5 Participants Last post by  hidden187
Well here is one for you guys...

I have the sears for my M99, but can't remember how to put it back together!!

I had it apart to try and swap some sears, but didn't ever get it back together. Now when I have my steel sears in I am trying to get things back up and going. Well now I am having some problems.

I have my new sears in the trigger group, and yes they are APS-2 internals!! I am having problems with the two little springs that hold the piston sear in the upright position.

There is one on either side, and these are the problem as of right now.

So if anyone has an APS-2 rifle, or a clone, is there anyway you could get some pics of the trigger mech? I am in need of the pics so I can get the trigger mech back up and going. And so I can get my Barrett back shooting.

Thanks in advance guys.
1 - 1 of 17 Posts
Hidden, go ahead and start a new thread in the appropriate section with the same pictures/info and one of us will sticky it for you.
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.