Airsoft Sniper Forum banner

Trip mines

8223 Views 40 Replies 17 Participants Last post by  Killer
Last Sunday, I was lying in a ditch waiting for the enemy to come. I was watching our teams flank and I was there to hold up any enemy attack trying to flank our team. While I was waiting there I was thinking to myself, wouldn't it be useful to have a trip mine down the way they would come come if they were to attack.

Since then I have been thinking alot about how to get a trip mine. However I am not sure on how to go about it. There are several things I have to consider:
» one is that I dont have the budget to go out and buy an airsoft claymore or mine. That means it will have to be cheap so it will probably be a DIY job.
» two is that the sites I play at dont allow grenades or mines to be filled with BBs so it needs to be something that makes a loud noise.
»three is that it needs to be small enough to be easy enough to carry.

Hoping to hear your thoughts and ideas. Is the requirements too much to ask for or is it possible.

Happy posting.
1 - 1 of 41 Posts
Zero one sell electric det switches. they're re-usable and are reasonably cheap. you get a remote and one detonation mechanism in a pack for about £20. ($30 or so?) or a bigger pack you can get up to 4 or more detonation mechs. The remotes work like claymore remotes, clackers.

Tlsfx or other pyro companies do electrically triggered pyro that can be set off with these systems. There fantastic, my site uses them for IED simulation and they have a range of about 100m

BUT depending on the laws in Ireland.... not sure if you could use them.
1 - 1 of 41 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.