Airsoft Sniper Forum banner

TSD M700

3K views 11 replies 4 participants last post by  mojo 
#1 ·
Hey, I'm pretty new to the snipering part of airsoft.
I've recently become more and more interested in sniping ever since I got to use one in a game a month or so back. I managed to get 2 kills out of 8 people.

I felt pretty good after that day, I was using a TSD M700, was shooting with .28's.

I like the look and feel of the gun, and the performance felt pretty good.
( i cant really say due to my lacking experience in sniping. )

Anyways, I want to get started in sniping, and I want to know if i should buy a TSD M700.
Will i be able to upgrade it?
If so which upgrades should i be getting?
New tightbore/bucking?

I also saw on ASGI that the AGM MP-001 is able to upgraded with the newish airsoft gi pe sniper upgrades for the VSR/BAR10.

Would either the TSD M700 or the AGM MP-001 be worthy of purchase?
I would save up for a VSR-10 but my money is short, and i recently lost my job, so I don't see to much coming in from time to time.
 
See less See more
Discussion starter · #4 ·
Okay so i edited this post because i sound arrogant, and I couldn't handle that i posted that.

I appreciate the setup you've shown me Mojo but, I would prefer to have a bolt action, I've been using a M4, Prometheus inner barrel, and Guarder bucking, which i can get around 160ish + feet range, accuracy is a little less. I've been practicing field craft with it, but, the gun is terribly loud, and I am easily given away by the noise.

Basically, this is what i want to know.
If i save up for a decent bolt action, what should i been going for?
CA M24? TM VSR-10? (please no L96's)

And Mojo, can you make me a set up with either the VSR or the CA M24?

I saw you made one for a CA M24 but it was difficult to follow,
I've been trying to make a Bar-10 setup for a little while but, I'm not totally sure what I'm doing, I'll post what i have so far in a second.

/ninja edit

This is what I added, and what I've read works well, and is cheaper than most.
I don't know how i feel about Airsoft Gi's PE parts but, they are slightly cheaper.

JG BAR-10
http://www.airsoftgi.com/product_info.php?products_id=2761

Airsoft GI PE Reinforced Piston for VSR10 / Bar10 Series
http://www.airsoftgi.com/product_info.php?products_id=5709

Airsoft GI PE M170 Spring for VSR10 / Bar10 Series
http://www.airsoftgi.com/product_info.php?products_id=5713

Airsoft GI PE Reinforced Piston Sear for VSR10 / Bar10 Series
http://www.airsoftgi.com/product_info.php?products_id=5711

Airsoft GI PE Reinforced Spring Guide with Bearings for VSR10 / Bar10 Series
http://www.airsoftgi.com/product_info.php?products_id=5712

Airsoft GI PE Reinforced Trigger Sear for VSR10 / Bar10 Series
http://www.airsoftgi.com/product_info.php?products_id=5710

Laylax PSS10 VSR10 430mm Precision Barrel
http://www.airsoftgi.com/product_info.php?products_id=4947
(I would rather buy a Prometheus but I hear Laylax is Promo in secret.)

Firefly VSR-10 Hop Up Bucking (Soft)
http://www.airsoftgi.com/product_info.php?cPath=31_201&products_id=4008

The total for this would barely be $300, I love that price to be honest.

Does this look okay? or Would i be better off trying to get the actual Laylax parts?
 
Discussion starter · #7 ·
Sorry to do this to you again, Mojo.

But does this look okay?
I decided you were right(your are more experienced than be anyways), I should keep perfecting myself, and a m14 would probably be the best way to go. But, in stead of your setup, do you think this would be good?

Cyma CM032 M14 (OD) = $125
http://www.airsoftgi.com/product_info.php?products_id=3732

Madbull Version 2 650mm length 6.03mm = $35
http://www.airsoftgi.com/product_info.php?products_id=5443

Guarder = $6.75
http://www.airsoftgi.com/product_info.php?products_id=670

Suppressor (to cover long barrel) = $45
http://www.airsoftgi.com/product_info.php?products_id=2665
( choose that suppressor because it doesn't add to much barrel, and it covers up some, and it gives a cool look)

Cyma M14 scope mount = $15
http://www.airsoftgi.com/product_info.php?products_id=4047

The total is about $225.

The only think I'm worried about is if that suppress will cover the barrel, it says 170mm but I'm not sure if that's the whole thing or just the front.

Do you think that will work well, and can someone confirm that that barrel and suppressor will work out?

This is a hefty price for myself but, I figure this could be a great start for a good DMR for myself.
 
Discussion starter · #9 ·
I think I will go with the Prometheus, I have one in my M4 and enjoy it a lot.

Wow, that is bad ass beyond words.

This is actually what I am looking to make mine look like..


Is the Cyma M14 you have really quiet?
I'm sick of my M4's loud clank noise.

Also, for internals later on, since i want to have a rough plan, I was thinking with going with a Systema Silent Head set but, I'm unsure which will work with an M14.
There is two, one for version 2 gearbox and another for version 3.
Would either of them work?

Is there any other internal upgrades i should think about doing?

I also plan to remove full-auto.

Also, what size battery can i fit in the stock of that M14?
Possibly a 8.4v 4200mAh NiMH Large Battery?
 
Discussion starter · #11 ·
Actually this body kit is made by G&P
http://www.airsoftextreme.com/store/index.php?main_page=product_info&cPath=407_422&products_id=3500

It's relatively expensive but, I don't plan on buying it for quite sometime so it really doesn't matter to much.

I will play with the stock battery for sometime, then I'll go to my local shop and see if i can order a battery similar that will fit well.

Maybe keeping the full-auto is a good idea, never really thought about how important it is in the first place.

Do you think the guarder bucking is the way to go, I'm really only going with it because thats whats in my M4, but thats not really made for distance etc.

I don't really understand the whole 45% on the one bucking you linked to me.
Can you explain that a little more for me?

Also, do you think i would be okay shooting .25's?
or should i step up to something a little heavier?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top