Airsoft Sniper Forum banner
1 - 6 of 7 Posts

·
Registered
Joined
·
142 Posts
I have never had any loading issues with BB's up to 0.36g. The 0.40g I use sometimes do get jammed (all BB's madbull's - hate the grey colour). The rifle (my signature) is otherwise great.

BTW what dimensions have you printed those barrel spacers?
 

·
Registered
Joined
·
142 Posts
I have the laylax 555mm barrle but I had to cut the bridge to make it use ML bucking.
i still havent cut it because it sits so nicely into my muzzle breach i almost dont need barrel spacers
 

·
Registered
Joined
·
142 Posts
In fact im quite satisfied but I think I could get better with proper barrel length. I dont use my rifle on the field but only as target plinker.

Rifle itself looks like this



It is the stock flash hider and i had to drill it out a bit to fit the barrel.
 

·
Registered
Joined
·
142 Posts
I have ordered 2 sizes of barrel spacers from airsoftpro.cz and they fit nicely in the outer barrel. I secured them in place by adding some ptfe tape on both sides of the spacer and they are still holding in place.
 

·
Registered
Joined
·
142 Posts
seems nice but i think the bucking is wrong. mayve a diamond 60° bucking?
Depends where he lives. Also Mr. Lucifer make an intro post please.
 
1 - 6 of 7 Posts
Top