Airsoft Sniper Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Well my dilemma is that I want a tighter bore barrel than the stock barrel and I'm sitting here trying to find one that will fit the stock utg L96 hopup and I cant seem to find one (or atleast be sure) since I'd rather not buy a barrel just to realize it wont fit my stock hopup. I know I could solve this problem by buying a PDI hopup but Im trying to find a way around that due to personal preference
 

·
Registered
Joined
·
571 Posts
Your trying to avoid the PDI hop up chamber? In all honestly, the stock chamber is a good design, but it's terribly executed, and most TBBs that I know of for that length are AEG cut, unless you get one custom made. I think you'll have to succumb to the PDI chamber unless you feel like waiting for EdGI or PCT to custom cut you one if they don't have any in-stock, unless other companies started to make them.
 

·
Premium Member
Joined
·
3,494 Posts
If you don't go with that, look into the HP chamber. Took some work to get mine performing the way I wanted it to, but after testing a variety of buckings and such, I got it giving me very nice results. It also allows for the use of AEG barrels, while at the same time, being the same design as the stock chamber only improved.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top