UTG L96 upgrade help

1916 Views 10 Replies 5 Participants Last post by fuzzywolly, Jul 21, 2011

nelsonho396

Discussion Starter · Jul 19, 2011

Well everyone said this to me so make a intro post. This is how go to the beginner section and as a subtopic you should see introduction. That is the wrong kit and with all kits like that they are usually crap. Here is a link to the gun that the upgrade kit fits in. http://images.hobbytron.com/LP-SOFT-M324SR-A-lg.jpg . The upgrade kits if your looking for cheapy but maybe sucky go with the Evike rebrand. I think they are decent not the best.
Here The kit. Saying this is around the fps of the standard L96. So if you don't want new sear. You dont have too I just recommend it.
http://www.airsoftpost.com/product_info.php?cPath=648_656&products_id=35641
I don`t know if this kit your have to use your piston cup but someone will come help me soon.

Save

1 - 1 of 11 Posts

inthetallgrass

· #2 · Jul 19, 2011

The intro thread is in the beginners section. THekit you bought is fine for a person on a low budget, just don't use the spring that comes with it unless you want to break your trigger. There are plenty of home mods you can do, such as lube up parts, teflon parts and for consistency put little bit of foam into the gaps of the hop up chamber.

Save

1 - 1 of 11 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month