Airsoft Sniper Forum banner

UTG L96 upgrade help

1913 Views 10 Replies 5 Participants Last post by  fuzzywolly
Well everyone said this to me so make a intro post. This is how go to the beginner section and as a subtopic you should see introduction. That is the wrong kit and with all kits like that they are usually crap. Here is a link to the gun that the upgrade kit fits in. . The upgrade kits if your looking for cheapy but maybe sucky go with the Evike rebrand. I think they are decent not the best.
Here The kit. Saying this is around the fps of the standard L96. So if you don't want new sear. You dont have too I just recommend it.
I don`t know if this kit your have to use your piston cup but someone will come help me soon.
1 - 2 of 11 Posts
I have heard dont attack me or anything but on the KWA forum I heard using silicon oil and a paper towel actually bad and you and you should try water and like a strip of a t shirt, but I think the bucking cleaning guide is good. I think my kit would be easy and simple because It has all your need and the L96 should be able to handle m150 springs because it shoots around the m150 spring range and a metal piston and spring guide is always a bonus.
1 - 2 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.