[wesley810]

First off, there's no need to make threes threads on the exact same topic. Not sure if that was intentional or not.

Refer to the stickies in this section of the forum. There are a few on this exact rifle that show how to disassemble, upgrade, silence, and do very helpful DIY mods. In my opinion, this rifle is pretty easy and fairly cheap to get shooting out to about 80-100 yards.

This rifle shoots pretty fast out of the box. I would recommend the PDI hop-up chamber, bucking, and a nice tightbore barrel for your first upgrades. You should also do every DIY mod that is available (they are cheap and help a ton).

 

[wesley810]

I actually just recommended the PDI because most places carry it. I did have the HP hop-up chamber in my rifle. I sold it the day after installation though, so I can't say much on it. A PDI tightbore and that chamber did however allow my rifle to throw MadBull .40's out to just short of 100 yards fairly accurately. The rest of the rifle was just purely stock.

The HP chamber is so much cheaper also. It think mine was around $25; great deal!