Airsoft Sniper Forum banner
1 - 20 of 21 Posts

· Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Hello
I was wondering what clones of the vsr 10 are good. I'm in the uk and need a two-tone gun. I've looked at the bar 10 but haven't found any of them in the uk so the Bar is not an option.:shrug: Preferably the price should be around £130. I've heard that the hfc vsr 11 is ok if you take out the recoil weights. Also i had a look at the cyma snipers but they got mixed reviews.
Thanks
 

· Registered
Joined
·
14 Posts
Have no idea. Dont own one. But after reading alot about it, it wouldnt be my first choise, but would defenetly be right after TM and JG. (if u want a VSR that is... i know i wanted one, and was only considering this 3 brands. in order from best to worse = TM, JG, WELL.)

PS: im not sure this orange one is in stock, but they have them in more colloursd as well, just take a look :)
 

· Registered
Joined
·
99 Posts
Hello
I was wondering what clones of the vsr 10 are good. I'm in the uk and need a two-tone gun. I've looked at the bar 10 but haven't found any of them in the uk so the Bar is not an option.:shrug: Preferably the price should be around £130. I've heard that the hfc vsr 11 is ok if you take out the recoil weights. Also i had a look at the cyma snipers but they got mixed reviews.
Thanks
Try harder. JG Bar 10 is the asnwer.

I have a TM G-Spec that I change almost everything. (Spent a lot of money for a better stock? With almost the same quality of JG Bar 10). Just using the stock and the hop up, that, if I have the possibility to change for AA chamber + Maple Leaf Autobot 60º or 70º, I will do.
 

· Registered
Joined
·
19 Posts
Discussion Starter · #8 ·
Try harder. JG Bar 10 is the asnwer.

I have a TM G-Spec that I change almost everything. (Spent a lot of money for a better stock? With almost the same quality of JG Bar 10). Just using the stock and the hop up, that, if I have the possibility to change for AA chamber + Maple Leaf Autobot 60º or 70º, I will do.
I was thinking a FN Herstal spr A5m (https://www.airsoftworld.net/fn-herstal-spr-a5m-m40-a5-special-police-sniper-rifle.html)

:shrug:Ill have another look for a bar though
 

· Registered
Joined
·
4,152 Posts
I can vouch for the WELL. Sure, the stock feels a little flimsy but for the price it's hard to beat.

Take a look at taiwangun.com. They are, despite the name, based in Poland and shipping to the UK won't be that bad. They have the MB03 in stock for 60 euros, which is a bargain if you ask me.

They also had the JG in stock last time I checked. Make use of it while you're still part of the EU :hehe:
 

· Registered
Joined
·
19 Posts
Discussion Starter · #10 · (Edited)
Can't seem to find the bar 10 on Taiwangun or anywhere else.:(
The problem is i need it two tone for the uk as i don't have a ukra.
Ill have a look for the well mb03 if you think it would be better than the Fn Herstal.
Thanks anyway

EDIT: What about the cm701b? or is that just junk?
 

· Registered
Joined
·
640 Posts
take a look around this forum you will see the full review of cm701a/b .

Basicly like JG bar-10, but had worse cylinder than JG.
 

· Registered
Joined
·
16 Posts
Also if you want a clone that is compatible but not the original type the Well Mb04 is an option. and the FN Herstal I have had VERY bad personal experience with it I can tell you its not 100% compatible everything is a bit off the cylinder gunks up really fast like you have to clean the thing every few days I dont know it is was just me but it was also very crapily made.
 

· Registered
Joined
·
99 Posts
ok now i have no clue what to do.
Oh well

(Get it oh WELL ... ok then)
I think you need to think about HOW EASY IS UPGRADE YOUR WEAPON. (Rewrited) The better plataform is VSR10 to upgrade (better that any other) because the market offer around the world. I say to you. I buy a Tokyo Marui VSR 10 GSpec, and I change almost everything. I ask to you: Why spend your money in something that you will change? I will need to change the receiver now (mandatory because a problem), and will buy a bullbarrel with P flute. Maintain the stock? (That is insane good but...)
 

· Registered
Joined
·
56 Posts
  • Like
Reactions: Ekashoter
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top