Airsoft Sniper Forum banner

Vsr 10 feedback!

2021 Views 23 Replies 6 Participants Last post by  1tonne
Hi everyone. I am planning on building my first Vsr and hope you guys could give me some feedback on this build. Thank you in advance =)

Base- echo 1 psr (jp-88)
Aa hop up chamber
Aa zero trigger with blue 90 degree piston
Maple leaf autobot 70 bucking
Aa m150 spring
Aa 6.01 x 430mm barrel
Aa barrel spacers
Aa cylinder and cylinder head
Aa spring guide
Bbs .3 (undecided still)
I have never upgraded an airsoft gun before and assuming I air seal everything properly, what type or performance can I expect with this build?
1 - 2 of 24 Posts
You would most likely also have to up the spring to an M170 if you are going to use 0.4gm bb's. The M150 spring will still fire 0.4gm bb's but it won't have the power to get the bb out there to long range.
^^Recently installed and tested both AA m150 and m170. I had to cut the m170 down to get it down to 550 for field play around here. The performance against the m150 (490+ fps) was a noticeable change in distance/accuracy.
Thank you ... and are there decent alternatives just incase I can't find any in stock?
Honestly I had a hard time finding a decent white bb that I could see. Geoff'S are the best I've ever used, and i think they keep a good stock l. I wouldn't waste $$ on any others
1 - 2 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.