Airsoft Sniper Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi. I have a WELL MB03 VSR-10 that I've been using for a while stock. I decided to upgrade finally. I had two questions regarding sniper upgrades (since this is my first). the first being model specific. Are all VSR-10 parts compatible? While browsing Evike, I've been seeing lots of TM parts around (not that there is much on Evike). I was wondering if it's possible to use these parts for my WELL.
The next question I had was about which companies should I go to for parts. There are always good companies and bad companies when it comes to these things, and I'm not sure which is which. Please help.
 

·
Registered
Joined
·
49 Posts
As far as I know, the Well MB03 will take all vsr10 parts, someone else who owns a mb03 can probably chime in and let you know more about that. In terms of companies it seems like most people hail PDI to be the best quality and performance. You can purchase parts from xfire. This doesn't mean other companies are "worse" just that PDI has been known to be more reliable and reputable. Some other great companies are Laylax, Edgi, and Action Army(their hop up chamber is incredible). You really can't go wrong with any of the options. Most people try to stay away from Angel Custom, I haven't had experience with them but I've heard some negativity as well.

-Rosh
 

·
Registered
Joined
·
5,596 Posts
The cylinder and piston on the WELL VSR10 has a smaller diameter. ASPUK has WELL VSR10 cylinders and pistons.
 

·
Registered
Joined
·
238 Posts
Hi. I have a WELL MB03 VSR-10 that I've been using for a while stock. I decided to upgrade finally. I had two questions regarding sniper upgrades (since this is my first). the first being model specific. Are all VSR-10 parts compatible? While browsing Evike, I've been seeing lots of TM parts around (not that there is much on Evike). I was wondering if it's possible to use these parts for my WELL.
The next question I had was about which companies should I go to for parts. There are always good companies and bad companies when it comes to these things, and I'm not sure which is which. Please help.
The cylinder inner diameter on the well mb-03 is smaller than normal and you cant fit a normal sized piston in it without modding your piston (filing the guide rings)
Everything other i think is full vsr compatible
 
  • Like
Reactions: 1tonne

·
Registered
Joined
·
5,596 Posts
Just buy a normal cylinder and upgrade everything in it.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top