Airsoft Sniper Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
8 Posts
I'm very new to airsoft snipering and I just plink around. I have a Well MB03 which I think im right in saying is a clone of these rifles.

Anyway, I don't know what spring came with my rifle stock but with a simple doubling up of the piston O ring (smaller one in first then the stock one on top) and a 10mm plastic spacer over the spring guide which I made out of a bicycle bar end cap, I was upto 550fps with 0.2's! It's currently hitting 390fps with 0.4's.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top