Airsoft Sniper Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
20 Posts
Hi flea. I have a bore up PDI kit, and I compared the cylinder head with a stock TM VSR cylinder and (of course it was bigger) however, it seems that it would fit if it were regular size, but don't hold me to that. Where the problem would occur is with the threads. They will have to match, and you have a greater chance of them not matching than matching. I know that mixing cylinder parts is not recommended, but the Laylax PSS10 air seal damper cylinder head does fit the stock cylinder from what I hear. (I have no personal experience with it, but I have seen builds with it so it must!). I have the version 1 PDI VSR-10 hop up and I bought a SCS nub for it. Takes some time to secure it and tune i, but it works well for me.
I hope I helped! Goodluck!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top