Airsoft Sniper Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
858 Posts
I’m actually interested in this Vsr-One. Curious as to when it will be released. Well, available in the US. Anyone know? Also, the folding part of the stock looks proprietary, but if the one part comes out and it has buffer tube threads, that’s a plus for me!!
 

·
Registered
Joined
·
404 Posts
If this has buffer tube thread... I might be interested as well... it would allow a relatively simple off the shelf systems to combine polarstar ugs stock. I know in several kythera videos, they had eluded to making a single shot variant for the system (However it might be years down the line as they still need to get the auto version out first).
 

·
Registered
Joined
·
858 Posts
Well the UGS stock I believe the regulator is built in. The line would have to be routed through the back. Not hard to make a hole but the hardest part is keeping the line in place in the UGS reg. The line fitting that comes with the UGS just has 2 o rings on it. It stays in place from the line sitting how it does being routed to the back of a gearbox. So fitting it to another platform is tricky.
 

·
Registered
Joined
·
2,331 Posts
You could probably have some sorta swivel fitting in between 2 pieces of line, if you bought some 95° polyurethane 1/4 inch air line, which is stronger and more bendy than the standard 6mm stuff.
It's a lil hard to get on, but it never ever leaks.
 
1 - 7 of 7 Posts
Top