[Plazmaburn]

This section is strictly for posting links to your STL files you wish to share. Please use external file hosting services for uploading your files, this is to keep storage space open.

Keep all of your files in one post! (or at least try to..) This will keep the thread a bit more orderly and easier to navigate.

ANY OTHER POSTS IN THIS SECTION WILL BE DELETED. NO QUESTIONS, NO REQUESTS.

If a file becomes unavailable, PM the author of the file first! Then PM me if you get no reply, as I will be downloading all of them to keep a backup copy just in case.

Also note, this thread is subject to being migrated to another thread if this becomes a thing.

 

[Plazmaburn]

Plazmaburn's STL files

This is the V1 chamber block: https://www.dropbox.com/s/rwr3rdr1zae9uzx/M40A2 Front Block VSR.STL?dl=0

I have to redo the V2 as the file corrupted. (Thats what I get for using a flash drive..)

 

[Reliku]

Cool idea. Here's my LRB cap for the VSR pro barrel:

LRB Cap by Reliku - Thingiverse

And the accomodating "guide":

http://www.airsoftsniperforum.com/41-vsr-rifles/25793-lrb-cap-easiest-way-lrb-your-gun.html

I'll assume I'm still not allowed to post the accomodating suppressor for this LRB unit :hehe:

 

[g650usmc]

The attached model is pretty much everything from a JG BAR-10.
Finally got it exported to STL. Let me know if there is any problems with viewing it.

https://www.dropbox.com/s/9klx2gv1mh8s7gm/JG BAR 10 Rev5.stl?dl=0

Parts NOT included:
-Stock (Inlay diagram to follow)
-Hop-Up Unit (I will be making/uploading a model of the AA unit eventually)
-Barrel and bucking (modeled, will upload separately)
-Magazine (modeled for external dimensions, internal dimensions and parts to follow. Will upload separately.)

 

[Mattyboyzhere]

The attached model is pretty much everything from a JG BAR-10.
Finally got it exported to STL. Let me know if there is any problems with viewing it.

https://www.dropbox.com/s/9klx2gv1mh8s7gm/JG BAR 10 Rev5.stl?dl=0

Parts NOT included:
-Stock (Inlay diagram to follow)
-Hop-Up Unit (I will be making/uploading a model of the AA unit eventually)
-Barrel and bucking (modeled, will upload separately)
-Magazine (modeled for external dimensions, internal dimensions and parts to follow. Will upload separately.)

Do you have this as a part file so that it could be used to create parts for the rifle? - e.g. new stock?

 

[Hidden dragon]

i have a few on hand though idk what people would actually use

vsr-10 dust cover, rail, and level:
https://www.thingiverse.com/thing:4101403

 

[csakip]

I have a TDC https://www.thingiverse.com/thing:1808598
A gspec barrel spacer https://www.thingiverse.com/thing:779033
And a magpull https://www.thingiverse.com/thing:1607574

 

[arcticd]

90 degree trigger box
https://www.thingiverse.com/thing:4504384

 

[Ghost963cz]

Made a high(er) top rail for VSR clones
https://www.thingiverse.com/thing:4739177

 

[Ghost963cz]

Made some stocks for VSRs VSR 10 Lightweight Modular Airsoft Stock

 

[Ghost963cz]

SPR/Severe-Duty based muzzle brake for VSR-10, https://www.thingiverse.com/thing:4807379

 

[Ghost963cz]

Airsoft VSR-10 Sniper Stock - McMillan A5 by Ghost963 VSR 10 Stock - McMillan A5

 

[Collat3ral]

Hello.
Does anyone have a design for a VSR magazine? I saw a thread, but it's from 2017 and I don't want to necro.
Need the magazines asap, but my local shop doesn't hold them atm

 

[SiliconeSword]

You are best off printing one of THESE and buying some M4 mags

 

[arcticd]

TDC drill guide VSR/SKT-10 30mm by Arcticd guide to drill tdc for 30mm barrels vsr
SW-10kt VSR/APS2 hop up Chamber - groove cutter for vsr buckling by Arcticd hop up chamber for 30mm barrel vsr
Scope mount 25mm picatinny rail 21mm by Arcticd low scope fixture, great in the woods, help you shot they branches