Airsoft Sniper Forum banner

VSR upgrades help.

5266 Views 28 Replies 8 Participants Last post by  Cheese Man
Hey guys, I'm pretty okay with my L96 knowledge but I know nothing about VSR's. I'm considering in investing in a TM VSR as my lighter rifle and and I would like to know a few things about it. I will be taking the Laylax route.

First and foremost. Assuming I do get a VSR it will definitely be the G-Spec. I love silencers but I know the barrel fits a 303, not including the silencer. How long is the silencer?

As far as hop up goes, there's 3 choices And there's the R-hop but as far as I know it's integrated with any of the three hop up chambers.
My hop up choices.
-Stock hop up(I've heard the VSR has decent hop up when used with r-hop)
-Tokyo Marui Precision Brass Barrel & New Chamber Set for VSR-10(430mm)
-Laylax VSR-10 AERO Chamber NEO(I've never heard of this up until today.)

Which is the best?

My Barrel choices.
-Laylax 6.03(430mm) VSR-10(I'm not sure if it works with upgraded hop up chambers)
-Prommy 6.03(407mm)AEG

Everything else I pretty much know.
-Laylax 450 fps spring(I'll look for that later)
-Laylax Teflon Cylinder
-Laylax Cylinder head
-Laylax Z-Trigger w/ Orange piston
-Laylax Spring guide 9mm
-Laylax Piston head
-If I go with the stock hop-up, then a nine ball(purple bucking) If I do one of the upgrade hop-ups then I'll use the W-hold.

Anything I'm doing wrong or any suggestions? I really don't know much about VSR's so feel free to say whatever you feel would be better.
See less See more
1 - 1 of 29 Posts
The reason the G-spec won't intially fit with the TM precision chamber is due to the fact that the suppressor does not allow inner barrel to pop through it. Just need to file the suppressor window down a bit.
1 - 1 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.