VSR upgrades help.

5272 Views 28 Replies 8 Participants Last post by Cheese Man, Mar 25, 2012

slayerfanx55

Discussion Starter · Mar 24, 2012 (Edited)

Hey guys, I'm pretty okay with my L96 knowledge but I know nothing about VSR's. I'm considering in investing in a TM VSR as my lighter rifle and and I would like to know a few things about it. I will be taking the Laylax route.

First and foremost. Assuming I do get a VSR it will definitely be the G-Spec. I love silencers but I know the barrel fits a 303, not including the silencer. How long is the silencer?

As far as hop up goes, there's 3 choices And there's the R-hop but as far as I know it's integrated with any of the three hop up chambers.
My hop up choices.
-Stock hop up(I've heard the VSR has decent hop up when used with r-hop)
-Tokyo Marui Precision Brass Barrel & New Chamber Set for VSR-10(430mm)
-Laylax VSR-10 AERO Chamber NEO(I've never heard of this up until today.)
http://www.airsoftatlanta.com/Laylax_VSR_10_AERO_Chamber_NEO_p/58466.htm

Which is the best?

My Barrel choices.
-Laylax 6.03(430mm) VSR-10(I'm not sure if it works with upgraded hop up chambers)
-Prommy 6.03(407mm)AEG

Everything else I pretty much know.
-Laylax 450 fps spring(I'll look for that later)
-Laylax Teflon Cylinder
-Laylax Cylinder head
-Laylax Z-Trigger w/ Orange piston
-Laylax Spring guide 9mm
-Laylax Piston head
-If I go with the stock hop-up, then a nine ball(purple bucking) If I do one of the upgrade hop-ups then I'll use the W-hold.

Anything I'm doing wrong or any suggestions? I really don't know much about VSR's so feel free to say whatever you feel would be better.

See less See more

Save

21 - 29 of 29 Posts

wesley810

· #21 · Mar 25, 2012

From what I've read, that certain point isn't very long either (around 450mm I think)- correct me if I'm wrong.

@0326reconman: Switching the barrel length to 450mm won't make nearly as much of a difference in the performance of your rifle as hop-up mods and quality of parts will. I wouldn't worry about changing the length unless you really wanted to. I'd focus more on the hop-up mods and such that you originally listed and what were recommended, as those are what will really add range and accuracy to your rifle.

Save

Cheese Man

· #22 · Mar 25, 2012

Right on the money on all counts.

Save

slayerfanx55

Discussion Starter · #23 · Mar 25, 2012

Okay, so according to cheese man, the TM chamber is good and it already comes with the barrel. So That plus the R-Hop, and the purple nineball bucking. What nub should I use with that, I've read that the SCS is good, but also bad since it's hard? I had one for my L96 which I have yet to install.

As for the quality, I use strictly laylax and PDI. I have never even considered using any of those cheap-o's. I always try to go for the best I can get, even if it means waiting a bit more.

And no one has said anything about the laylax VSR-10 Chamber. Is it any good?

Save

Cheese Man

· #24 · Mar 25, 2012

No SCS with r-hop, I use rubber, but HS5 makes M-nubs that also work quite well with the r and er-hops.

Good.

Meh, it is fine, but I would go strictly TM for my builds.

Save

slayerfanx55

Discussion Starter · #25 · Mar 25, 2012

What do you mean strictly TM? TM as in stock parts? Or do they make their own after market parts other than the chamber?

Save

wyvernfist

· #26 · Mar 25, 2012

0326reconman said:
And no one has said anything about the laylax VSR-10 Chamber. Is it any good?

Cheese Man said:
Meh, it is fine, but I would go strictly TM for my builds.

0326reconman said:
What do you mean strictly TM? TM as in stock parts? Or do they make their own after market parts other than the chamber?

See above :tup:

Save

MiloXC3

· #27 · Mar 25, 2012

Laylax chamber requires an AEG barrel and bucking.
The TM Precision chamber comes with an inner barrel.

If I were you, I would get Firefly hard rubber instead of Nineball, and I would get the TM Precision chamber with the 430mm barrel and install the barrel in to the suppressor of the G-Spec. As someone said earlier, you will need to file the inside a bit but it will fit one you have done that.