Airsoft Sniper Forum banner

WE M14 HPA rig?

9468 Views 28 Replies 5 Participants Last post by  wesley810
I want to turn the WE m14 GBB into a DMR, but I don't want the inconsistency of a gas rifle. I immediately thought of learning to drill and tap a magazine and using HPA, but I don't know if the stock nozzle can support FPS of 500+ (field regulations are 440FPS w/ .36). I see that Evike sells a nozzle for 500 FPS, and was wondering if that was necessary to buy in order for the gun to handle the FPS output of using an HPA.
With all of that said, I would also buy the RA-tech 6.01 barrel and hop-up
1 - 1 of 29 Posts
The hose and regs can be had for cheaper, but not by much if you want a high-quality setup. I would recommend an austinwolv reg set, and buy the FE from airsoftfix. In the future (1-2 months is the quote that I got), as far as I know, they will be carrying regs, HPA bottles, etc. too.
1 - 1 of 29 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.