[Hamlet]

Hi guys this is my design for a vsr10 trigger. I like the 2 stage trigger sistem with a travel trigger before a quick piston release
What do you think about it?
https://ibb.co/D4ZFh3Z

 

[BlackDogAirsoft]

Very nice.
I thought about doing this but I couldn't be bothered.
It would be interesting to see a design where the sear drops straight down though.

Sent from my SM-A505FN using Tapatalk

 

[Hamlet]

Well, the release is too short with a short and quick contact, I think that's a good thing, But otherwise I don't know if in the 90 degrees triggers, the piston spring will add to the trigger more pressure making the trigger pull harder, in that case the sear spring should be more light

 

[Hamlet]

Very nice.
I thought about doing this but I couldn't be bothered.
It would be interesting to see a design where the sear drops straight down though.

Sent from my SM-A505FN using Tapatalk

Hum... Like a door lock?

 

[SiliconeSword]

Very nice.
I thought about doing this but I couldn't be bothered.
It would be interesting to see a design where the sear drops straight down though.

Sent from my SM-A505FN using Tapatalk

I believe the Bulltrigg does that.......

--------------------------------------------------------------------------------------------------------
My prize VSR-10

Base Gun Tokyo Marui VSR-10 G-SPEC
Power System Old Style Wolverine Bolt
Power System Upgrades Airsaver spring with 2 shims
Cylinder Wolverine Aluminum Cylinder
Barrel Airsoft Philosopher 6.04X475mm
Bucking Airsoft Philosopher 40º
Chamber Airsoft Philosopher CNC Chamber
Barrel Spacers 10 Spacers Made Of Solid Masking Tape
Mag Release Angel Custom (its really good!!!)
Banananananananana Spartan Doctrine 40mmX335mm With Special Cream
Battery Titan Power 7.4V X 350mah HPA Battrey
BBs BLS .45, BLS .48, Novritsch .46

DIY Mods
Stock Filled With Old Socks, Leather, Tape and Foam, Cylinder To Barrel Guide Sleeve Made Of A Seltzer Bottle, Dust Cover Made Of An Arizona Can, Short Stroked Cylinder, 90º Airline Fitting, 1/4 Extra Strong Airline

Future Upgrades
Homemade 5,000PSI Airstock, Carbon Fiber Outer Barrel, AirsoftPro Receiver, Maple Leaf Bolt Handle, Palmer's Pursuit Dual Regulators, First Strike First Stage Regulator, IER-Hop, Delrin Cylinder Sleeve, And A Possible Skeleton Stock Sort Of Like Plazmaburn's VSR-X

Where you can see my projects and related pictures
https://www.instagram.com/silicone_sword/?hl=en

 

[BlackDogAirsoft]

I believe the Bulltrigg does that.......

--------------------------------------------------------------------------------------------------------

My prize VSR-10

Base GunTokyo Marui VSR-10 G-SPEC

Power SystemOld Style Wolverine Bolt

Power System UpgradesAirsaver spring with 2 shims

CylinderWolverine Aluminum Cylinder

BarrelAirsoft Philosopher 6.04X475mm

BuckingAirsoft Philosopher 40º

ChamberAirsoft Philosopher CNC Chamber

Barrel Spacers10 Spacers Made Of Solid Masking Tape

Mag ReleaseAngel Custom (its really good!!!)

BananananananananaSpartan Doctrine 40mmX335mm With Special Cream

BatteryTitan Power 7.4V X 350mah HPA Battrey

BBsBLS .45, BLS .48, Novritsch .46

DIY Mods

Stock Filled With Old Socks, Leather, Tape and Foam, Cylinder To Barrel Guide Sleeve Made Of A Seltzer Bottle, Dust Cover Made Of An Arizona Can, Short Stroked Cylinder, 90º Airline Fitting, 1/4 Extra Strong Airline

Future Upgrades

Homemade 5,000PSI Airstock, Carbon Fiber Outer Barrel, AirsoftPro Receiver, Maple Leaf Bolt Handle, Palmer's Pursuit Dual Regulators, First Strike First Stage Regulator, IER-Hop, Delrin Cylinder Sleeve, And A Possible Skeleton Stock Sort Of Like Plazmaburn's VSR-X

Where you can see my projects and related pictures

https://www.instagram.com/silicone_sword/?hl=en

Forgot about that. Sorry.

Sent from my SM-A505FN using Tapatalk

 

[SiliconeSword]

Forgot about that. Sorry.

Sent from my SM-A505FN using Tapatalk

Thats cool, no worries!

--------------------------------------------------------------------------------------------------------
My prize VSR-10

Base Gun Tokyo Marui VSR-10 G-SPEC
Power System Old Style Wolverine Bolt
Power System Upgrades Airsaver spring with 2 shims
Cylinder Wolverine Aluminum Cylinder
Barrel Airsoft Philosopher 6.04X475mm
Bucking Airsoft Philosopher 40º
Chamber Airsoft Philosopher CNC Chamber
Barrel Spacers 10 Spacers Made Of Solid Masking Tape
Mag Release Angel Custom (its really good!!!)
Banananananananana Spartan Doctrine 40mmX335mm With Special Cream
Battery Titan Power 7.4V X 350mah HPA Battrey
BBs BLS .45, BLS .48, Novritsch .46

DIY Mods
Stock Filled With Old Socks, Leather, Tape and Foam, Cylinder To Barrel Guide Sleeve Made Of A Seltzer Bottle, Dust Cover Made Of An Arizona Can, Short Stroked Cylinder, 90º Airline Fitting, 1/4 Extra Strong Airline

Future Upgrades
Homemade 5,000PSI Airstock, Carbon Fiber Outer Barrel, AirsoftPro Receiver, Maple Leaf Bolt Handle, Palmer's Pursuit Dual Regulators, First Strike First Stage Regulator, IER-Hop, Delrin Cylinder Sleeve, And A Possible Skeleton Stock Sort Of Like Plazmaburn's VSR-X

Where you can see my projects and related pictures
https://www.instagram.com/silicone_sword/?hl=en

 

[Masada]

Looks like the Noobie trigger, but 2-stage. I like that. I bet it would feel really nice too as long as good materials are used.

 

[1tonne]

Put an adjusting grub screw facing upwards at the back of the first trigger sear (on the actual trigger). This screw would then mean that you could adjust the travel of the first stage.

 

[Hamlet]

Put an adjusting grub screw facing upwards at the back of the first trigger sear (on the actual trigger). This screw would then mean that you could adjust the travel of the first stage.

Yes, I was thinking on that too.
Do you think that a strong spring like a M190 or the PDI150 will make the pulling of the trigger more heavy?

 

[1tonne]

You could make it lighter simply by putting a roller ball on the front of the green sear. So instead of friction pulling it off the last sear, it would roll off. LayLax and Action Army both use roll balls and that is why they have the lightest trigger on the market.
I have attached a picture of an AA trigger. It is a little hard to see but there are rollers on the first sear

 

[Hamlet]

A little roller on the sear, that's a good idea!

 

[BlackDogAirsoft]

Does anyone know how the s trigger mechanism works because supposedly it has some kind of 'silencer' on the full version (not on the budget one).

Sent from my SM-A505FN using Tapatalk

 

[Hamlet]

A silencer on the trigger mechanism?

 

[BlackDogAirsoft]

They call it a silencer. The S-Trigger is known for silence, and somehow they make it quieter.

Sent from my SM-A505FN using Tapatalk

 

[Hamlet]

Airsoft pro cylinder head and that kind of beauty sponge for makeup glued oin the top of the piston, and you will have the most silence rifle

 

[CR3160]

wait does anyone sell two stage triggers for the vsr?

 

[SiliconeSword]

wait does anyone sell two stage triggers for the vsr?

Don't think so, and there's no reason to have them as they serve no purpose in airsoft