[13camtheman]

When I pull my bolt back on my utg l96 it automatically releases forward I dont even have to push it.What part do I need to fix this?

 

[dragon64]

Either the trigger sears or piston... maybe even both

 

[MiloXC3]

It will be the sears. What condition are your sears in?

Try rebuilding the trigger unit; I had a similar problem with my VSR once!

 

[13camtheman]

Should this fix it?
http://www.airsoftatlanta.com/PDI_Trigger_Sear_Type_96_p/66234.htm

 

[Pinguiclia]

That and http://www.airsoftatlanta.com/PDI_Type_96_Piston_Sear_p/64023.htm

 

[13camtheman]

One question,off topic from this thread but were do you get the thing that says svd dragunov user?thanks

 

[Pinguiclia]

There was a user custom making sigs for people one day. But before you drop the money for the PDI sears do what Milo said and reassemble your trigger box might kick it back in unless your sears are worn down.

 

[dragon64]

One question,off topic from this thread but were do you get the thing that says svd dragunov user?thanks

From this thread:

http://www.airsoftsniperforum.com/showthread.php?t=5238

 

[lulukchoo23]

Yes, check and see if your trigger box is still intact. The cause of the problem can range from as simple as a slipped angular spring, all the way to something catastrophic like a cracked bushing or sear.

If the shell or a bushing is cracked, sears won't help you. The cheapest option for you is a UTG Metal Trigger, which is $30. The trigger box is stronger than the already decently strong stock box, so you should be set after that.

 

[13camtheman]

So if I get this http://www.airgunwarehouseinc.com/py-a-3391.html?utm_source=thefind&utm_medium=cse I want need the PDI sears right?

 

[Pinguiclia]

Yes, you can either run that trigger box with the sears it comes with or put the PDI sears in it.