Airsoft Sniper Forum banner
1 - 3 of 3 Posts

· proverbial discord mod wannabe
Joined
·
1,625 Posts
Discussion Starter · #1 · (Edited)
Hello.
I am soon going to build a CO2 powered Striker AS01 for a friend using a Mancraft kit. I don't have a chrono however, so I don't know what FPS it will be shooting.
Given a 550mm barrel (6.03), roughly what PSI will I need to put on the regulator for it to shoot 500fps.
I don't know whether this calculation is even possible but any help would be much appreciated.
Thanks.
Black Dog
 

· proverbial discord mod wannabe
Joined
·
1,625 Posts
Discussion Starter · #3 ·
It is a Mancraft SDIK shooting with CO2 from the Mancraft Mars Regulator.
The barrel is a 6.03 action army 550 mm with a maple leaf autobot 60 degree bucking.
I will initially set the gun to about 4 bar or about 58 psi.
We will be using bbs that are:
.40
.43
and .48 grams.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top